Zbxn Peripheral Drive Half-Axle Suction Dredger

• Customization: Available
• After-sales Service: Technical Guidance
• Warranty: 2 Years
• Model NO.: ZBXN
• Type: Sludge Dewatering Machine
• Method: Combined Treatment
• Usage: Industrial, Agriculture, Hospital
• Certificate: ISO9001
• Specification: SS304
• Trademark: Lanwu
• Origin: China

Product Description

Product Description

 

ZBXN sludge suction machine is used for the circular secondary sedimentation tank of the sewage treatment plant. It scrapes the sludge settled at the bottom of the tank to a group of sludge suction pipe orifices arranged along the radius direction, and then it is discharged through the central sludge discharge pipe for sludge refluxing or thickening and dewatering. At the same time, it skims the sludge on the tank surface to the slag collection hopper and is discharged out of the tank through the slag collection hopper for further treatment.

 

Features:
ZBXN series suction dredger is a new generation of suction dredger designed on the basis of digesting the imported equipment. It has the following obvious characteristics:
 1. simple structure and light weight: due to the half-bridge type, there is only one set of driving device, and the main beam is also used as the mud tank, compared with the full-bridge suction dredger widely used in China, the weight is significantly reduced;
2. Saving operation cost and convenient maintenance and management: since the sludge in the sludge tank is discharged to the central sludge discharge pipe through the non-rotating central sludge tank without dynamic seal, the short flow of supernatant is eliminated, which not only avoids the waste of energy consumption of reflux pump, but also ensures the concentration of reflux sludge, creating conditions for the normal operation of biochemical process. Meanwhile, the maintenance work caused by dynamic seal is eliminated;
3. The new transmission device is optional. The key component of the drive device - reducer adopts the advanced shaft-mounted type, without centering and coupling, with compact structure, high efficiency and light weight;
4. Over-torsion protection mechanism can be configured to automatically alarm and shut down when the torque reaches the set value, which is safe and reliable.

Range of Application

 

Product Parameters

Model parameters	ZBXN -18	ZBXN -20	ZBXN -22	ZBXN -24	ZBXN -26	ZBXN -28	ZBXN -30	ZBXN -32	ZBXN -34	ZBXN -36	ZBXN -38	ZBXN -40
Pool diameter D (m)	18	20	22	24	26	28	30	32	34	36	38	40
Center cylinder diameter D2 (mm)	1250			1550			1900			2100
D3(mm)	2300			2600			2950			3150
D4(mm)	2100			2400			2750			2950
Pool side depth H1 (m)	2.4			2.6			2.8			3.1
Superelevation of pool top H2 (m)	0.45						0.55
Diameter of sludge discharge pipe (m)	0.4			0.5			0.6			0.7
Rolling surface load 2xF1 kN	2x6			2x14			2x20			2x28
Center cylinder load F2 kN	16			22			33			44
Radial load of center cylinder F3 Kn	6			11			17			28
Width of raceway L (m)	0.45			0.5			0.55
Linear velocity around (m/min)	≤1.8
Drive motor power (Kw)	0.37
Motor power of vacuum system (kW)	3

 

Introduction to Structure

Product Display

Company Profile