Functions and features:
Solar water pumps, also known as photovoltaic pumps, is use of solar energy to drive the pump operation, it can float on the surface of the water and can be lifted and lowered with the water level of the removable irrigation and drainage machinery; its characteristics and primary functions are:
a.Convenience at your fingertips: simply submerge the pump into the water for instant use.
b.Energy-saving and power-saving: change the suction head to the pressure head; no matter which specification and model, the water inlet is always 25-50 cm below the water surface, always in a better suction position. Long service life: PV pumps, without deep water pressure, cannot get stuck in silt, so the shaft seal has a long service life. Fish pond drainage and irrigation, save time, more flow, put the pump into the water, turn on the PV switch, you can pump water, no need for machine port, not afraid of rain, not subject to suction range limitations, lightweight; can also be used for farmland irrigation, due to the float pump inhalation of the water temperature is higher compared to the river bottom water, so it is conducive to the growth of rice and other crops.
Model Selection:
GLSUN-XB is a small flow and high-head photovoltaic deep well pump. It is mainly used for pressurization in high places, mines, deep wells, car washing, sprinkling and cooling, garden sprinkler irrigation, desert, grassland, and farms. It can also be connected to storage batteries for temporary water use.
GLSUN-B is a photovoltaic fountain pump mainly used for landscape fountains, farmland irrigation, drainage, turning over ponds, living, agricultural, and industrial water, and water extraction from rivers.
GLSUN-DB for large flow low head photovoltaic circulating pump: reasonable structure, the channel using axial flow channel water supply, the channel resistance is small, high-efficiency water supply, high flow rate of low-loss high-efficiency motor is equipped with overheating protection device, the shaft sealing structure of the double built-in mechanical seals pump casing using stainless steel, non-metallic parts with double built-in mechanical seals operation is simple to plug and play with the appearance of the design of the extraction of the convenient handling purposes Apply to wigwams, waterfalls, streams, koi fish Han cycle, etc. Note: The use must be reliably grounded and configured with a rated leakage protection switch. The submersible motor relies on the internal circulation of water cooling to avoid exposure to the air in the low-water running, resulting in overheating the pump's main body.
Solar Panel:
Due to different applications, our products are equipped with different solar panels. The table shows standard photovoltaic panels and solar panels equipped with deep well pumps. If you have other requirements, please contact customer service or send an email.
Standard |
|
For deep well pumps |
Maximum Power |
275W±3% |
|
Maximum Power |
275W |
Maximum Power Voltage |
31.5V |
Maximum Power Voltage |
31.1V |
Maximum Power Current |
8.50A |
Maximum Power Current |
8.84A |
Open Circuit Voltage |
38.0V |
Open Circuit Voltage |
38.1V |
Short Circuit Current |
8.80A |
Short Circuit Current |
9.32A |
Maximum System Voltage |
1000(TUV)/600(UL) |
Maximum Series Fuse |
15A |
Nominal Operating Cell Temperature |
45±2°C |
Power Selection |
0-5W |
Module Application |
Class A |
Module Application |
Class A |
Series Fuse Rating |
20A |
Maximum System Voltage |
IEC 1000V |
Fire Resistance |
Class A |
Electrical Rating At: STC(1000W/m²;AM 1.5 spectrum; Cell temperature 25°C) All values are nominal unless designated as tested |
Electrical Rating At: STC AM=1.5 IRRADIANCE=1000W/m² Temp=25ºC |
Solar panel warranty: 10 years